aqualine plumbers electricians heating renton wa


(425) 943-9248


Renton, WA

Warning Signs Of Furnace Gas Leaking


Yuck! Something smells similar to rotten eggs!

Gas often can give off a very unpleasant odor, frequently described as sulfur or rotten eggs. While the natural gas is odorless normally, gas manufacturers are needed to add chemical known as mercaptan, which offers it that typical smell.

Smelling gas tends to be a dangerous situation which you must immediately respond to. There are lots of horror stories of the homeowners who have actually lost everything because of gas furnace explosions or a few other gas-related incidents.

If you ever smell gas and could track it to your furnace back, immediately turn the unit off, evacuate the house, and call fire department.

Contacting the local gas company and fire department is a great place to begin.They will offer inspections, but not repair. To fix underlying issue,contact Renton Heating for any emergency services. Rotten eggs and sulfuric-like smell are clear indications to take immediate actions before a fire takes place.

In addition to danger of fires and explosions, high level of natural gas could cause consciousness loss and in extreme conditions, death. The symptoms of a natural gas exposure incorporate dizziness, nausea,headaches, fatigue, and unequal breathing.

Contact the local poison control centers if you ever feel affected by your exposure to gas.

What Should You Do In Case You Smell Natural Gas In the House

Here are a few things you can do in case you smell gas inside your house:

- If you smell gas in the home, then avoid lighting matches as well as other fire source.

- Don’t use any electrical appliances or devices that could lead to a spark; preventing potential fire risk is the key.

- Turn the source off of gas if you could, immediately evacuate the whole household, and contact fire department from safe distance. Then contact your heating company and your gas company.

Learn what can you do to avoid home fires and problems with your gas line or gas furnace. Gas lines often are installed underground and remain dependable for decades. Over the years, however, corrosion can happen,leading to dangerous and unwanted gas leaks. Gas leakages can also happen as gas travels in your house to power the gas-burning appliances.

Finding the signs of gas leakage will keep everybody in your house safer and offer general peace of your mind.Educate your whole household on signs of indoor gas leakage.

Signs of Possible Gas Leakage

Do you smell sulfur or rotten eggs?

The smell of natural gas is frequently referred to as rotten egg smell. The smell of sulfur or rotten eggs isn’t to be ignored. It’s gas making its own presence known. Another reason of rotten egg smell is a hazardous electrical situation. Follow smell to recognize where smell is coming out from and what the next actions must be. To be secure, evacuate the house and call your fire department so as to assess the condition.

Do you hear hissing sound?

You actually can hear and not only smell a gas leakage if it’s coming from behind the wall or a pipe. Gas makes sound when it’s leaking from gas line. In case you can pinpoint smell and you could hear a linked sound,ensure to take instant action to avoid more of gas from escaping out.

Is patch of the lawn dying?

If specific patch of the lawn is dying, then underground gas leakage can be to blame. A few of your house’s outdoor vegetation inexorably sits above gas line. In case there’s a slow leakage, then plants or lawn directly above will start to die.

In case you do hear, smell, or locate gas leak, don’t stay indoors. Seek instant help from fire department in case it’s emergency situations. You don’t want to utilize any appliance which can cause a spark. Avoiding a gas fire tends to be the main priority once gas leakage is identified.

Professional HVAC companies provide annual safety and efficiency inspections of gas appliances and heaters that can be life-saving. Contact your local heating company for annual maintenance and inspection of your home’s gas heater.

Signs To Replace Your Old Furnace


The leaves are now changing colors, days are getting short, and inevitable cool weather is now setting in. A few are anticipating another rough winter season in many areas.

It is an excellent time to ensure that your heating unit can easily get you through winter season and keep your toes and nose toasty and nice.Below is the complete checklist to assist you decide if it might be time to now replace a heating unit or make a few tune-ups at least to your current one.

Your Furnace Is Over 15 Years Old.

In case your furnace has past its own 15-years mark and starting to have maintenance problems, there’s a very probable chance it’ll have to be replaced now. It might be working, however it is probably not working at maximum efficacy and your utility bill probably is at all time high as a consequence.

Furnaces are similar to cars; older they become, the more maintenance and tuneup they need, generally incurring the maximum breakdowns in last 2 years of their life. If your heating unit is nearly 15 - 20 years or even older and you’ve a repair costing over 15% of a new heating unit, you must go ahead and immediately replace it.

Your Equipment Repairs And Energy Bills Are Increasing Steadily.

An older heating unit is bound to operate harder to offer levels of heating that it did while it was new. It means more frequent repairs and higher energy bills. A little increase in both of them is fine for older furnaces. But once you start seeing significant bills increase sand the furnace repairman recognizes you by name, then it might be time to quickly look into getting new furnace. The total quantity of money you'll save in long run from more efficient system will be worth your short-term investments.

The Rooms All Through Your House Are Different Temperatures.

Old and inefficient furnace can lead to a few rooms being warmer or colder than others. It’s likely the consequence of old furnace and out-of-date duct system losing out its capability to distribute the heat evenly all through the home. If you are experiencing a few of these problems, feel free to call Heating Renton units experts to see what the next steps must be.

Your House Has Soot Around Registers.

Any older furnace might begin spewing out dirt, dust, or rust particles,and that can be not just irritating for those that aim to keep clean house, but hazardous to everybody’s health. Whenever you spy rust or soot around the heating unit or registers, it’s a sign that your furnace has a lot of CO2. It also can cause excess of dryness, affecting the wood flooring, furniture, walls, and plants of your home. If you see plants beginning to wilt, or your family members are facing itchy throats, and dry eyes or headaches, it might be time to quickly replace the furnace.

Your Furnace Is Very Noisy.

Heating units tend to make a little noise whenever they turn off and on, but if the noises begin to get louder progressively, it might be time to now replace your unit. The reason for a few of the sounds can be:

- Popping: The sound can occur when parts of your furnace cool and warm in response to temperatures changes in your system.

- Rattling: Unsecured ductwork, loose sheet metal or screws can be the reason of this sound.

- Humming: Your fan’s motor may generate electrical humming sound, but the fan must never be disruptive or loud. If it’s, your blower fan motor or inducer motor could be beginning to fail.

Quick Heating Unit Fixes Anybody Can Do Before Contacting a Professional


With cold weather in swing, you count on your heating more than ever before. So if your heating unit shuts down suddenly or stops blowing hot air, you are in a very chilly situation. But, fixing the issue can be simpler than you believe.

The fixes below can solve most of the furnace issues without you having to pay out for a professional technician to come.

Change the heating unit air filter if dirty

If the heating unit’s filter gets very dirty, it’ll block return flow of air to the unit. It is like placing a blanket on  head and then asking you to normally breathe.

A dirty filter can causes the following problems:

- Decreases volume of warm air blown out: The blocked return air refers to the fact that the heating unit has lesser to blow out the supply vent, leaving you very chilly.

- Heating unit completely shuts down: As your heating unit has to work longer to heat the home, its heat exchanger overheats, making the furnace to shut down automatically.

A dirty filter also will cause soot to accumulate in heat exchanger,causing the furnace to run inadequately and decrease its lifetime. Check air filter in 1-3 months and also change if it is dirty.

- Check the thermostat: There might be nothing at all wrong with the heating unit at all. The thermostat, which is the controlling center of heating system, might be the reason.

If your heating unit is not coming on or not blowing warm air, then try these troubleshooting tips with the thermostat before calling a professional repairman:

  • Set thermostat to “heat” rather than “cool.”
  • Set the thermostat to 5 degree above room temperature in order to see if the furnace turns on.
  • Replace batteries.
  • Open the thermostat panel and blow out any debris or dust gently.

Ensure that blower motor’s panel is shut

In case someone opened blower motor’s panel to perform a repair, they might not have shut that panel correctly. If it isn’t pressed in properly, a safety device can prevent the heating unit from running. So ensure that you shut heating unit’s blower panel securely.

Inspect the air ducts

Let us say your heating unit seems to be operating fine. Blower is working, warm air is coming …in most of the rooms. You have got some cold places in your house. Why? The reply lies in the air ducts.

Firstly, check for handles that are protruding from the air ducts. They are dampers which control the airflow. Ensure that they’re open fully (i.e., handle is parallel to the ductwork).

If a few of the rooms are cold still, your ducts might have gaps, holes or cracks in them enabling the warm air to escape. It’s what is known as leaking ducts. Such leaks not just make the room cool, but it can

  • Run up your energy bill
  • Suck up dust in the ducts, contributing to bad air quality inside your house

Find where the leakages are in the air ducts and seal all of them using a mastic sealant.

Ensure gas valve is fully open

Like with blower panel, somebody may have shut your gas valve to perform a repair and then forgot to turn that back on. In case it is off, then no gas can enter your heating unit, so nothing at all will burn. Turn the gas valve back on (handle must be parallel to gas pipe) ,and then you are really good to go.

Whenever in doubt, call the professionals

Obviously, such fixes will not solve all of your heating issues. So, in case none of them do the job for you, it’s always best to contact Heating Renton for assistance.

Dos and Don’ts of Electrical Safety!


Prevention is better than cure

When it comes to safety, we all need it and want it. We want job safety, house safety, and various other safeties as well. But what about electrical safety? Don’t we need it? Don’t we want it? Electrical safety is often neglected. It is not considered about, or even thought about. But just like job security, electrical safety is important enough. There are many things you can do to preserve electricity, save energy, and to ensure the safety of your electrical appliances, because if we do not have awareness for electrical safety, accidents can occur.


- Make sure to cover each of your switches and plug outlets with cover plates. Replace damaged cover plates with new ones

- Use plastic cover plates to ensure safety of children and pets as well. Keep cable cords out of their reach

- Ensure that the wiring is new or maintained. Also make sure that the appliances are not too old. Faulty wiring can lead to a short circuit.Also, of a live, open wire touches the appliance’s body, it would be similar to touching a bare live wire

- Make use of extension cords temporarily. Extension cords can create sparks and generate short circuits, so it is better to use them on a temporary basis

- Use quality wiring to ensure proper safety and durability. Bad quality wiring will lead to major electrical problems. Although quality wiring might be costly, it is totally worth it. It is better to prevent than to find a remedy later

- Keep away any water or liquid from the electrical wiring and appliances at all costs. Impure water is a strong conductor of electricity

- Invest in GFCI outlets and waterproof covers for the outside wiring and outlets. It ensures that rain doesn’t get to the wiring, because as mentioned, impure water is a strong conductor of electricity, and fire

- Wear rubber or plastic shoes or sandals while working on electricity as rubber and plastic are really good insulators

- Teach children the hazards of electricity, and teach them to stay way in cases like short circuits. Create awareness among children

- Call a professional Electrician Renton when in dire need.


- When removing a cord from the plug outlet, you must not yank it, or pull at it. This can lead to a damage in both the cord and plug outlet, and if the switch is on, can create sparks, or flames

- Drill nails to a cable in order to attach it to the wall. It will create problems with the insulation

- Use electric cables which are broken or are about to break. Even if they are slightly broken and the bare wires are not visible, refrain from using them. They can still cause problems like minor electric shocks

- Try to fix or repair any electrical appliance or device while it is still plugged in. It can be very fatal, leading to electric shock

- Allow kids to fly kites or climb trees where there is a power line nearby. If any of the cables in a power lines come out to be broken and a child falls over it or has an indirect contact with it, it can be very fatal

- Paint on meters or transformers or hide them behind bushes. It can misguide utility workers into thinking that there is nothing there when they need to work on them

- Put up signs and boards on utility poles. Nails, boards, tacks, etc can be dangerous to workers who need to climb those poles

Things To Know While Purchasing Pedestal Sinks


Installing pedestal sinks can really make a bathroom feel much larger by freeing up lots of space usually occupied by the vanity cabinet. These sinks can be quite cost-effective also when remodeling your bathroom.But prior to you rip out the old vanity for installing a pedestal sink,here are a few things you should consider.

Shopping out for pedestal sink. Do careful comparison shopping. Will you pick one with single faucet hole, widespread or 4 inch-center faucet? Are you looking for something economical, top of line or mid-grade? With many manufactures of the pedestal sinks, you might spend noteworthy time finding something which is good for you out there.

Will plumbing be hidden or visible? Pedestal sinks that are installed with visible plumbing can look fine,but it is also probable for installation to hide the plumbing completely. Do a little research and have a look at the examples of both kinds of installations prior to deciding what you wish to do. Hiding plumbing will most probably need moving the drain and water lines. If you're remodeling, it is quite easy to move drain and water lines to the ideal location. However if you wish to avoid the added work, keep location of the current Plumber Renton in your mind when you choose on which pedestal to buy. Larger pedestal may compensate and hide lots of plumbing, so remember that as well.

What bracing is needed? After narrowing your choices down, check manufacturer's bracing needs. Bracing in wall is required often, so the wall might need to be opened. Remember that you also may need to anchor base to floor.

Height of drain lines. Check the specifications on pedestal you are thinking of, and ensure that the present drain heights correct. Also, see to ensure that location is centered just where you wish it, since you have a small amount of traps swing only when installing the pedestal sink. Drain lines are meant to fit behind the pedestal directly so that it’s barely visible. If location or height isnot right, then you will need to move the drains in the walls, and then finish wall before installing pedestal sink.

What about water lines? Water lines as well as valves must be tucked tightly behind base of pedestal, in case it is possible. The lesser you see of drain and water line, the better your pedestal will look. Like with the trap, shut-off valves and water lines should match trim of bathroom, since they will be completely visible from a few angles. Lots of pedestal sinks with no special trim can appear just fine, however do a little research to ensure that the pedestal installation seems the way you wish it to be.

Will you require special fittings? A part of drain will be fully visible from some angles, and it’s nice if finish of trap matches the bathroom and faucet trim. If you’ve a chrome faucet,you may wish for a nice chrome drains trap and flange, instead of the black drain lines that are seen under sinks sometimes. Some drain finishes would be more costlier and more difficult to find out than others, so think of this and do research during planning process. You will then know what rates to expect, where can you get the needed parts and how much time it will take prior to you start the construction.

What about floor and walls? Floor and wall may not be completely done behind your old vanity. In case you are wishing to just remove vanity and install pedestal sink, then you should see if wall is painted plus the floor is completed so the pedestal sink can be mounted easily with minimal work.

Dewinterizing Your House- A Guide


It is essential to dewinterize a home to reverse winterizing for a home that has been completely empty during cold season. When any home has been winterized, then it generally means that water was shut down and drained in most plumbing systems to avoid freezing. At times flex lines are also disconnected from toilets, sinks, washing machines and dishwashers too. Water heaters are generally drained and water flex lines sometimes are left disconnected from water softeners and heaters.

Another kind of winterizing is carried out by filling water lines and drains line traps with the RV anti-freeze. The anti-freeze is poured into washing machines and dishwasher and usually cycled a bit ion order to get it in traps of machines so nothing just freezes and breaks. In order to dewinterize a home winterized by an expert service at time it is simpler to have them come again and reverse that procedure because they know what was done exactly. If you cannot have the same professionals or do not know who winterized the house there are a few basic steps that you can follow so as to DIY.

How to Start?

Dewinterizing a home will need checking each fixture before you begin to turn the water on. Go around to each fixture and ensure that flex lines are linked. Check the toilets, ice maker, sinks, dishwasher, water heaters, and whatever you may have in the home that is linked to water supply. Connect all that was disconnected prior to turning the water on.

Go around quickly and turn shut off valves off on anything with dedicated valve like toilets, sinks, and the dishwasher lines. If you do so you can go around slowly and test every fixture personally. This can provide you more of time and reduce the mess which can occur if you find many leaks. If it’s an older home and you don’t think shut-off valves would work, or Plumber Renton leak if you just turn them on or off then you may skip this. Skipping this means that you will need to be extra cautious to check for leakages before anything flood. You also can turn off hot water heater so that you can test cold water sides prior to turning on hot water side.

Flush Your Toilets

The toilets can leak right from seals between the bowl and the tank. Test them just by flushing every toilet many times. Keep your eyes out for water leakage or pooling at base of toilet. Also check the interior of every toilet tank and ensure that it fills appropriately and shut off fully.

Exterior Faucet

The freeze proof faucets could leak after dewinterizing too. Go around and check every exterior spigot so as to ensure that a reasonable amount of water tends to be coming out and they are working properly as well. Lower pressure here might mean that there’s a split in shaft causing a leakage. To be sure that these aren’t leaking you might have to go below the house in case it is on raised floors.

Keep Checking Out

Run lots of water at every fixture and check out each drain. Take your own time by running the water everywhere and also double checking that all is ok. Not every problem is visible immediately so keep checking again and again. If possible check under the home, do a crawl to make sure that nothing is leaking down there. Have some water pipes in attic? Then check in the attics and make sure that you don’t see any leaking water. Never rush while dewinterizing a home.

Contact Us:


Indicates required field